Surface Preparation Equipment
GRINDERS
















Model
SKU
Power Options
Weight
Length
Width
Height
S-EC 
50200 
1-1/2 HP 1O, 60 Hz, 115/230 V 
200 lbs 
41" (104 cm) 
24" (61 cm) 
38" (97 cm) 
S-EC 
52500 
2 HP, 1O, 50 Hz, 230 V 
200 lbs 
41" (104 cm) 
27" (69 cm) 
44" (112 cm) 
S-GC 
52600 
5.5 HP Gasoline Honda 
160 lbs 
41" (104 cm) 
24" (61 cm) 
38" (97 cm) 





SEC - Single-Disc Grinder
EDCO Grinders - Proven in over 40 years of use. Accept no substitute!

The portable Single-Disc Grinder will grind approx. 200-250 sq. ft./hr with EDCO Dyma-Serts.

Grinder Features
  • 11" working width
  • Gasoline or electric power option
  • Economical
  • Includes 1 multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and other grinding accessories
  • Three grinding accessories required per loading
Ideal for
  • Areas less than 1,500 square feet
  • Residential applications
  • Removing mastics, sealers & high spots

 


Model
SKU
Power Options
Weight
Length
Width
Height
2-EC 
50800 
3 HP Electric 1O-60Hz 230 VAC 
225 lbs. 
44.5" (113 cm) 
27" (69 cm) 
44" (112 cm) 
2-EC 
51300 
2 HP Electric 1O-50Hz 230 VAC 
225 lbs. 
44.5" (113 cm) 
27" (69 cm) 
44" (112 cm) 
2-EC 
50100 
1.5 HP Electric 1O-60Hz 115/230 VAC 
225 lbs. 
44.5" (113 cm) 
27" (69 cm) 
44" (112 cm) 
2-GC 
51400 
11 HP Gasoline Honda 
225 lbs. 
44.5" (113 cm) 
27" (69 cm) 
44" (112 cm) 
2-GC 
51800 
5.5 HP Gasoline Honda 
225 lbs. 
44.5" (113 cm) 
27" (69 cm) 
44" (112 cm) 
2-GCP 
54800 
11 HP Propane Honda w/ 115V Starter Kit 
275 lbs. 
44.5" (113 cm) 
27" (69 cm) 
44" (112 cm) 
2EC/2GC - Dual-Disc Grinder

EDCO Grinders - Proven in over 40 years of use. Accept no substitute!

Dual-Disc Grinder will grind appox. 350-500 Sq. ft./hr at 1/32" with EDCO Dyma-Serts.

Grinder Features

  • 22" working width
  • Gas, electric & propane power options available
  • Includes 2 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories
  • Counter-rotating discs prevent machine from pulling side to side-and give operator greater control
  • 6 grinding accessories required per loading
Ideal for
  • Large or small areas
  • Light grinding or cleaning of concrete surfaces
  • Leveling uneven joints
  • Removing mastics, thin-set, high spots, epoxies and urethanes
  • Lightly texturing slippery concrete surfaces


Model
SKU
Power Options
Weight
Length
Width
Height
411-E 
52800-230 
5 HP, 3O, HZ, 230 V 
305 lbs 
49" (124 cm) 
40" (102 cm) 
41" (104 cm) 
411-E 
52800-460 
5 HP, 3O, 60 Hz, 460 V 
305 lbs 
49" (124 cm) 
40" (102 cm) 
41" (104 cm) 
411-E 
53600 
5 HP 1O, 60 Hz, 230 V 
305 lbs 
49 (124 cm) 
40" (102 cm) 
41" (104 cm) 
411-G 
51500 
11 HP Gasoline Honda 
300 lbs 
49" (124 cm) 
40" (102 cm) 
41" (104 cm) 
411-P 
54400 
11 HP Honda w/ Electric Starter Kit 
350 lbs 
49" (124 cm) 
40" (102 cm) 
41" (104 cm) 





411- Four-Disc Grinder

EDCO Grinders - Proven in over 40 years of use. Accept no substitute!

Grinder Features

  • 36" working width with 4 sq. ft. of surface contact
  • Gas, electric or propane power sources available
  • Includes 4 multi-accessory discs that accept Dyma-Serts, Strip-Serts and all other grinder accessories
  • 4 counter rotating discs are double neoprene mounted for smooth, even action
  • 12 grinding accessories required per loading
  • Fast controlled grinding for larger areas
Ideal for
  • Production grinding and floor cleaning on large slab surfaces such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas
* New EDCO Product
TG-10 - 10" Turbo Grinder
The TG-10 is four times faster than conventional grinders.

The TG-10 allows you to grind wet or dry with a 10" working width. The grinder accessory is a 10" Diamond Grinding Disc that grinds 1/8"-1/4" and leaves a smooth finish to the surface.

Turbo Grinder Features
  • Flexible coupling head eliminates gouging
  • Four times faster than floor grinder
  • Rounded shroud allows you to grind within 1/2” of any vertical surface and also provides better dust control
  • Less torque on operator
  • New tapered roller bearings have improved seals for longer life and less maintenance
  • Four types of 10” Diamond grinding discs available

 
TMC-7 - 7" Turbo Combo Grinder

Features:

  • Three-position articulating frame adjustment for left angle, right angle or straight position grinding
  • Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
  • Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
  • Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
  • Available with 5.5 HP gasoline engine or with 2.0 HP electric motor
  • Comes standard with Flex Head Assembly, but is also available with optional Rigid Head Assembly for doing gutter work
  • New & improved tapered roller bearings provide less maintenance and longer life
Ideal for:
  • Edge grinding along vertical surfaces
  • Removing coatings, build-ups, markings, overlays or paints

CLICK HERE FOR GRINDER ACCESSORIES

HOME

contact us                         close this window